home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
An Invitation to the Roland World of Music
/
Roland - An Invitation To The Roland World Of Music.bin
/
drivers
/
scp55
/
readme.txt
Wrap
Text File
|
1996-03-05
|
7KB
|
171 lines
NOTICE
The contents of the files contained in this disk may not be modified,
copied, distributed, or transferred without the express written permission
from Roland Corporation.
The contents of these files are subject to change without notice due to
product enhancements.
Products and corporation name mentioned in this document are trademarks of
their respective manufacturers.
This directory contains two types of drivers:
- - SCP-55 driver for Windows3.1 and Enabler
- - SCP-55 driver for Windows95
Contents of this directory
~~~~~~~~~~~~~~~~~~~~~~~~~~
[SCP55]
|
+-- Readme.txt : this file
|
+--[WIN31] : includes SCP-55 driver for Windows3.1
| |
| +--- Readme.txt : document file
| +--- SCPMIXER.DLL : DLL for Mixer application
| +--- SCP55CNT.EXE : controller for SCP-55
| +--- SCP55.DRV : SCP-55 driver
| +--- OEMSETUP.INF : setup information file
| +--- INSTALL.EXE : installer for enabler
| +--- SCPENA.EXE : enabler for SCP-55
|
+--[WIN95] : includes SCP-55 driver for Windows95
|
+--- SOUND.INI : initial setup information file
+--- SCP95.VXD : virtual device driver
+--- SCP95.DRV : SCP-55 driver
+----SCP95.INF : setup information file
[] means directory name
Note: Please refer to the file "\SCP55\WIN31\README.TXT" for installation
of the Windows3.1 driver.
When playing or recording MIDI or WAVE data with the SCP-55 using
applications like DoReMiX, EasyJuke2 or Sound Recorder, do not remove
the SCP-55 from the PC card slot.
*You can remove the SCP-55 from the PC card slot when not playing
anything back.
Contents
~~~~~~~~
1.Setting SCP-55 Driver
1-1 Setting Windows95 PC Card Service
1-2 Installing SCP-55 Driver
1-3 Setting the "Multimedia Properties"
1-4 How to control the volume
2.Others
2-1 Installing "Volume Control"
2-2 When you use the SCSI Card again
3.Trouble Shooting
1.Setting SCP-55 driver
1-1 Setting Windows95 PC Card Service
(1)Click "PC Card" Icon in the "Control Panel" window, and "PC Card
Wizard" dialog box opens.
Note: If "PC Card Properties" is displayed, PC card is ready to use.
Please click the "CANCEL" button. Following procedure is not
necessary. Go to 1-2.
(2)You will be asked,"Are you using a PC card[network card,CD-ROM connected
to a SCSI card,etc.] to install Windows?". Select "No" and click the
"Next" button.
(3)You will be asked,"Do you want to review your system files and select
real-mode PC card drivers so Windows can disable them?". Select "No"
and click the "Next" button.
(4)Click the "Finish" button.
(5)You will be asked in the "System Settings Change"dialog box,"Would
you like to shut down your computer now?". Click the "Yes" button to
shut down your computer.
(6)Turn on your computer and start up Windows95.
*To see the detail, search for "Enabling support for" with Windows95
Help, and obey its instructions.
1-2 Installing SCP-55 driver
(1)Insert the SCP-55 into the PC card slot.
After a while, you will see a message which reads,"New Hardware Found"
and then a dialog box for selecting a driver.
Make sure that "Driver from disk provided by hardware manufacturer"
is selected, and click the "OK" button.
(2)You will see "Install From Disk" dialog box. Click "Browse..."
and select "A:\scp55\win95". Click the "OK" button and obey its
instructions to install the driver.
(3)Change the MIDI and WAVE device to "SCP-55" using the "Multimedia"
icon in the "Control Panel" window.(ref.1-3)
1-3 Setting the "Multimedia Properties"
*This function corresponds to "setting Mapper" in Windows3.1
(1)Double-click the "Multimedia" icon in the "Control Panel" window.
(2)Click "MIDI" tab.
(3)Select "SCP-55 for Windows95" from the list of "Single instrument"
(4)Click the "OK" button
(5)Setup "Audio" in the same way.
MIDI SCP-55 for Windows95
Playback SCP-55 Playback (336)
Recording SCP-55 Record (336)
1-4 How to control the volume
(1) Activate "Volume Control" that is included in Windows95.
("Start"->"Programs"->"Accessories"->"Multimedia")
(2)Open the "Properties" in the "Options" menu.
(3)Change Mixer device to "SCP-55 Mixer".
(4)Select "Playback" in the "Adjust volume for" box. Check all the
check boxes in the "Show the following volume controls" box,then
click the "OK" button. The mixer screen appears and you can control
the volume.
(5)Setup "Recording" in the same way.
2.Others
2-1 Installing "Volume Control"
(1)Insert Windows95 CD-ROM (ref.2-2)
(2)Double-click the "Add/Remove Programs" icon in the "Control Panel"
window.
(3)Select "Windows Setup" Tab, then select "Multimedia" from the list
of "Components:". Click the "Details..." button, and "Multimedia"
dialog box will open.
(4)Search for "Volume Control" from the list of "Components:" ,check
the check-box, and click the "OK" button. Click the "OK" button after
coming back to the "Add/Remove Programs" dialog box.
(Now, the application is installed.)
2-2 When you use the SCSI Card again
After setting the Windows95 PC card service, in some cases your SCSI
card connected to the CD-ROM will be unavailable. This is because the
SCSI card does not support Windows95.
In this case, click "Help" after clicking "Start" button, the type
"PC card" in the box of "Index" tab. Select "PC card/disabling support
for" and obey its instructions.
3.Trouble Shooting
3-1 In Case You Hear Noise When Playing Back a Wave File
There is a case you hear noise when the Power management is set on "Advanced".
In this case, take the following steps to change the setting.
(1)Click the "Start" button. Point to "Settings" and click "Control Panel".
(2)Double-click the "Power" icon in the "Control Panel" window.
Then, you see the "Power Properties" dialog box.
(3)Select "Standard" in "Power management". Then, click the "OK" button.
3-2 In Case the Wave File Playback Stops
When playing or recording MIDI or WAVE data with the SCP-55 using applications
like "DoReMiX", "EasyJuke2" or "Sound Recorder", do not start up "MS-DOS
prompt".